High Gloss Natural Stone Sealer - 1 Gallon, Water Resistant & Durable, Easy to Apply for Floor Driveway Patio

Product Description: Teexpert High Gloss Stone Sealer

Give your dull or faded stones a stunning makeover with Teexpert Wet Look Stone Sealer. Watch as your stone surfaces gleam like never before.

Usage Guidelines:

BEFORE YOU BEGIN: 1. Test a small hidden area of approximately 4 sq. ft. to ensure the desired results. 2. Pressure wash the area to be sealed, ensuring it is free of oil, efflorescence, laitance, or contaminants. Replace old joint sand with new coarse sand if necessary. 3. Rinse the pavers with water, ensuring any acids or cleaners used during cleaning are thoroughly rinsed off before sealing.

HOW TO USE:

STEP 1: SHAKE IT SLIGHTLY Before use, gently shake the product for maximum effectiveness.

STEP 2: APPLY EVENLY AND THINLY Apply a thin layer of sealer to the surface, allowing each layer to dry completely before applying the next. It is recommended to apply two layers for the best results. Note that drying time may vary based on temperature and humidity.

Tips: - When using a sprayer, mix water and sealer in a 0.5:1 ratio by volume. - For added sheen and durability, apply additional coats (up to 3). - Use a roller for consistent application and to prevent blotching.

STEP 3: DRYING TIME The sealer will dry to the touch in 0.5-1 hour. Allow the first coat to dry for 3-4 hours before deciding on a second coat.

APPLICATION CONDITIONS: - Surface must be clean, dry, and warm. - Temperature should be between 50°F and 85°F during application and the next 24 hours. - No rain forecasted for the next 24 hours. - Use a consistent application method. - Not suitable for polished stone or tile.

BEFORE YOU BEGIN: Always test on a small area before proceeding to ensure your expectations are met.

product information: